{"product_id":"aritech-ts1041-tecom-challenger-8-way-relay-board","title":"Aritech TS1041 Tecom Challenger 8 Way Relay Board Expander (NEW In Box)","description":"\u003cp\u003eThe Aritech TS1041 is an eight way relay board for the Tecom Challenger security system, sold in Australia under the Tecom part number S5020. It provides eight single pole Form C relays with dry NO or NC contacts, so panel outputs can drive door strikes, gates, lighting contactors, plant interlocks and any other equipment that needs a volt free contact. It supersedes the older TS0841 and offers lower latency, allowing more cards in series.\u003c\/p\u003e\n\u003cp\u003eThe board connects to its host by a ten way ribbon cable rather than a data bus, plugging into the Challenger panel at J14, a 4-Door or 4-Lift Controller at J21, a standard DGP at J8, or a Network Access Controller at J200. Cards can be daisy chained from an IN connector to an OUT connector. It runs from the 13.8 V DC supplied by the host, drawing 50 mA standby and 250 mA with all eight relays energised, and delays for several seconds on power up to prevent relay chatter.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e Aritech (Carrier)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e Tecom Challenger 8 Way Relay Board\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e TS1041\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlternate Part Number:\u003c\/strong\u003e TECOM S5020\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Relay output expansion board, PCB only\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRelays:\u003c\/strong\u003e 8 single pole Form C, NO or NC dry contacts\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContact Rating:\u003c\/strong\u003e 1 A at 0 to 30 V DC, 300 mA at 48 V DC\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOperating Voltage:\u003c\/strong\u003e 13.8 V DC from the panel, DGP or auxiliary supply\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCurrent Draw:\u003c\/strong\u003e 50 mA standby, 250 mA with all relays energised\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnection:\u003c\/strong\u003e 10 way ribbon cable. Challenger panel J14, 4-Door or 4-Lift Controller J21, standard DGP J8, Network Access Controller J200, or daisy chained card to card\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower Rule:\u003c\/strong\u003e Chains of 1 or 2 cards are powered from the parent device. Three or more cards require an external 12 V supply\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSystem Maximums:\u003c\/strong\u003e Up to 32 to 64 cards per Challenger panel, 2 to 32 per 4-Door or 4-Lift Controller, maximum 2 per standard DGP. 512 physical relays and 64 controllers overall\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBoard Size:\u003c\/strong\u003e Tecom BB format, 176 x 52 mm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompliance:\u003c\/strong\u003e RCM\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty Class On Label:\u003c\/strong\u003e 5 year\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSerial Number:\u003c\/strong\u003e 276243060290\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCountry of Manufacture:\u003c\/strong\u003e China\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e New in box\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEight Form C dry contact relays in one card\u003c\/li\u003e\n\u003cli\u003eDaisy chains card to card for large relay counts\u003c\/li\u003e\n\u003cli\u003ePowered from the host panel or DGP for chains of one or two cards\u003c\/li\u003e\n\u003cli\u003ePower up delay prevents relay chatter\u003c\/li\u003e\n\u003cli\u003eLower latency than the superseded TS0841\u003c\/li\u003e\n\u003cli\u003eCarries the Australian RCM mark\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDriving door strikes, gates and boom gates from a Challenger panel\u003c\/li\u003e\n\u003cli\u003eLighting and plant control interlocked with alarm areas\u003c\/li\u003e\n\u003cli\u003eLift control outputs on a 4-Lift Controller\u003c\/li\u003e\n\u003cli\u003eAdding relay outputs to an existing Challenger installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Includes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOne TS1041 relay PCB\u003c\/li\u003e\n\u003cli\u003e8 x M3 x 10 screws and 6 x PCB standoffs\u003c\/li\u003e\n\u003cli\u003e2 x two way and 8 x three way screw terminal plugs\u003c\/li\u003e\n\u003cli\u003e1 x ring terminal\u003c\/li\u003e\n\u003cli\u003e1 x ten way cable\u003c\/li\u003e\n\u003cli\u003eInstallation sheet\u003c\/li\u003e\n\u003cli\u003eNo enclosure and no power supply are included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAdditional Information\u003c\/h2\u003e\n\u003cp\u003ePlease read this before ordering. This is a Tecom Challenger part. It will not work in an Aritech ATS or Advisor Advanced panel, which is a different European system.\u003c\/p\u003e\n\u003cp\u003eThe card connects by ribbon cable, not RS-485, so it must be mounted inside or immediately adjacent to the host panel, DGP or door controller.\u003c\/p\u003e\n\u003cp\u003eA maximum of two cards can be fitted to a standard DGP. Chains of three or more cards need their own 12 V supply.\u003c\/p\u003e\n\u003cp\u003eRelay contacts are rated 1 A at 30 V DC. They are not suitable for switching mains voltage directly and interposing contactors should be used.\u003c\/p\u003e\n\u003cp\u003eThis is a bare PCB. No enclosure and no power supply are included. Installation should be carried out by a licensed security technician.\u003c\/p\u003e\n\u003cp\u003eThe carton shows shelf wear from storage. The contents are new and unused.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShipping from Sydney, Australia.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Aritech","offers":[{"title":"Default Title","offer_id":52952471896381,"sku":"S4274","price":172.26,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/8931\/9485\/files\/20260831_170229.jpg?v=1788193780","url":"https:\/\/indrelec.com.au\/products\/aritech-ts1041-tecom-challenger-8-way-relay-board","provider":"Indrelec","version":"1.0","type":"link"}