{"product_id":"aritech-ts1021-tecom-challenger10-8-input-expander","title":"Aritech TS1021 Tecom Challenger10 8 Input Expander for TS1020 DGP (NEW In Box)","description":"\u003cp\u003eThe Aritech TS1021 is an eight input expansion module for the Tecom Challenger10 TS1020 Analogue Data Gathering Panel, sold in Australia under the Tecom part number S5017A. It adds eight monitored alarm inputs to a DGP, and up to three modules can be daisy chained to take a single TS1020 from eight inputs to thirty two.\u003c\/p\u003e\n\u003cp\u003eThe module plugs into the DGP with a ten way ribbon cable at connectors J2 and J3, into the DGP's J7. It runs from the DGP's own 10.5 to 13.8 V DC supply and draws a maximum of 10 mA. A wide range of end of line resistor values is supported, including 10K, 6K8, 5K6, 4K7, 3K7, 3K3, 2K2, 2K2\/6K8, 2K0, 1K5 and 1K0. It is a Tecom B size board and mounts on four standoffs inside the DGP enclosure.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e Aritech (Carrier)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e Tecom Challenger10 8 Input Expander\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e TS1021\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlternate Part Number:\u003c\/strong\u003e TECOM S5017A\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Alarm input expansion module, PCB only\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInputs Added:\u003c\/strong\u003e 8 monitored alarm inputs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHost:\u003c\/strong\u003e Tecom Challenger10 TS1020 Analogue DGP only\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaximum Per DGP:\u003c\/strong\u003e 3 modules, taking the DGP from 8 to 32 inputs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnection:\u003c\/strong\u003e 10 way ribbon cable, module J2 and J3 to DGP J7\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSupply:\u003c\/strong\u003e 10.5 to 13.8 V DC from the DGP\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCurrent Draw:\u003c\/strong\u003e 10 mA maximum\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEnd Of Line Resistors Supported:\u003c\/strong\u003e 10K, 6K8, 5K6, 4K7, 3K7, 3K3, 2K2, 2K2\/6K8, 2K0, 1K5, 1K0\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBoard Size:\u003c\/strong\u003e Tecom B size, mounts on 4 standoffs inside the DGP enclosure\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty Class On Label:\u003c\/strong\u003e 5 year\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSerial Number:\u003c\/strong\u003e 260251690159\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCountry of Manufacture:\u003c\/strong\u003e China\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e New in box\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAdds eight monitored alarm inputs to a TS1020 DGP\u003c\/li\u003e\n\u003cli\u003eUp to three modules take a DGP from 8 to 32 inputs\u003c\/li\u003e\n\u003cli\u003eVery low current draw at 10 mA maximum\u003c\/li\u003e\n\u003cli\u003eWide range of end of line resistor values including 1K0, 1K5 and 2K0 which the older TS0021 does not support\u003c\/li\u003e\n\u003cli\u003eShips with 18 x 10 kilohm end of line resistors\u003c\/li\u003e\n\u003cli\u003eMounts inside the existing DGP enclosure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eExpanding zone capacity on a Tecom Challenger10 installation\u003c\/li\u003e\n\u003cli\u003eAdding detection points to an existing DGP without a new enclosure\u003c\/li\u003e\n\u003cli\u003eRetrofitting additional reed switches, PIRs and duress buttons\u003c\/li\u003e\n\u003cli\u003eSpare or maintenance stock for a Challenger10 site\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Includes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOne eight input expansion module with ten way cable\u003c\/li\u003e\n\u003cli\u003e4 x three way plug on screw terminal connectors\u003c\/li\u003e\n\u003cli\u003e5 x M3 x 10 mm pan head screws and 4 x PCB standoffs\u003c\/li\u003e\n\u003cli\u003e1 x ring terminal\u003c\/li\u003e\n\u003cli\u003e18 x 10 kilohm quarter watt resistors\u003c\/li\u003e\n\u003cli\u003eInstallation sheet\u003c\/li\u003e\n\u003cli\u003eNo enclosure and no power supply are included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAdditional Information\u003c\/h2\u003e\n\u003cp\u003ePlease read this before ordering. The TS1021 fits the Challenger10 series TS1020 Analogue DGP only. The superficially identical older TS0021 is the module that fits the TS1020, TS0820, TS0824 and TS0866. If you have a Challenger V8 era TS0820, TS0824 or TS0866 DGP you need the TS0021, not this board.\u003c\/p\u003e\n\u003cp\u003eThis is a ribbon cable module, not an RS-485 bus device, and it does not plug into a Challenger control panel directly. It expands a DGP.\u003c\/p\u003e\n\u003cp\u003eA maximum of three modules can be fitted per DGP.\u003c\/p\u003e\n\u003cp\u003eThis is a Tecom Challenger part. It will not work in an Aritech ATS or Advisor Advanced panel.\u003c\/p\u003e\n\u003cp\u003eThis is a bare PCB. No enclosure and no power supply are included. Installation should be carried out by a licensed security technician.\u003c\/p\u003e\n\u003cp\u003eThe carton shows creasing and handling marks from storage. The contents are new and unused.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShipping from Sydney, Australia.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Aritech","offers":[{"title":"Default Title","offer_id":52952474681661,"sku":"S4280","price":107.26,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/8931\/9485\/files\/20260831_170809.jpg?v=1788194287","url":"https:\/\/indrelec.com.au\/products\/aritech-ts1021-tecom-challenger10-8-input-expander","provider":"Indrelec","version":"1.0","type":"link"}